CTC Union ETU01C Manual do Utilizador descarregar pdf (Página 2)

All the FMUX20 chassis power supplies are hot swappable and modular, installing two into a

chassis provides redundancy should a single power supply fail. A fully loaded chassis can run

continuously with only one power module fitted into the chassis.

Power Redundancy

To further increase system reliability, the FMUX20 chassis is fitted with two hot swappable fan

modules. Both fan modules can be easily removed from the rear of the chassis, without interruption

to the operation of the line cards. A fully loaded chassis can run continuously with only one fan

module fitted into the chassis

Intelligent Cooling Fan

The FMUX20 features cascadeable management which

allows managing a stack (up to 10 chassis) from a single IP

address. Chassis are interconnected with standard UTP

cables that carry control signals. Each chassis has its own

ID, starting with the master chassis ID0 and cascading up

to ID9

Chassis cascade

The FMUX20 chassis provides an NMC (Network

Management Controller) card which must be installed

into the first slot of chassis. The NMC card allows a network

administrator with the ability to configure and monitor the

status of the blades. Management can be achieved

locally over RS232, or over the network by Telnet, Web or

SNMP.

Network Management

The FMUX20 chassis has been designed as a Fiber Mux Managed platform. This allows network

administrators to deploy the chassis in a wide range of Fiber Mux network. Technologies supported

by the chassis included Ethernet Fiber Optic Multiplexer.

Protocol Supported

Ordering Information

Example: FMUX20-CH20

FMUX20-CH20 : 2U 19” 20 slot chassis

FMUX20-AC : 100 ~ 240 AC power card

FMUX20-DC24 : 18 ~ 36 DC power card

FMUX20-DC48 : 36 ~ 72 DC power card

FMUX20 Chassis

FMUX20 Slide-in card

FMUX20-NMC :Network Management Card

FRM220-FOM04

:4E1 +100Mbps Ethernet card

Example: FRM220-FOM04

Slide-in card overview

2-102

10 chassis cascade with one IP management

Master

UTP cable

Slave 1

Slave 9

FMUX20

www.ctcu.com

Fiber Series

Fiber Optic Multiplexer-FRM220 Family

Fiber Optical Multiplexer

FOM04

●

4 channels unframed E1/T1

10/100Base-TX Ethernet

Auto MDI/MDIX

Auto-Negotiation or Force mode

Supports flow control

Supports 9K jumbo packets

Supports Link fault pass through (LFP)

One clear channel RS232 up to 250Kbps(Async)

1+1 fiber protection, less than 50ms

●

Supports Digital Diagnostics Monitoring Interface (DDMI)

AIS on signal loss on E1/T1 and fiber port

Loopback test on E1/T1, LAN, RS232, fiber ports

Supports Dying Gasp

Supports local or remote In-band management

(Monitor or Configure status) by SNMP manager

and console port.

Supports Order wire Ear / Microphone port.

Supports On-Line F/W upgrade.

Functions

Smart View Element Management System(EMS)

Platform server

SV-PLF-05:

5 Client user admission

SV-PLF-25: 25 Client user admission

SV-PLF-50: 50 Client user admission

Device Agents

SV-AGT-50: 50 Device agents

SV-AGT-100: 100 Device agents

SV-AGT-200: 200 Device agents

SV-AGT-500: 500 Device agents

Managed Modules

SV-Fiber:

FMUX20

Example: SV-PLF-05, SV-AGT-50, SV-Fiber

1 2 3 4 5 6 7 ... 39 40

Comentários a estes Manuais

Sem comentários

CTC Union ETU01C Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Transceptores de rede CTC Union ETU01C