Event Log
The event log keeps a running
record of events that happen in the
FRM220A-GSW/SNMP, including
cards inserted/removed, card faults,
power or fan faults, and remote
login/logouts.
Reset Device
The reset device function will do a
warm reboot of the GSW
CPU/Switch.
Factory Defaults
The Factory Default function will
return all configurations (except for
the TCP/IP settings) to their factory
defaults.
Software Upload
The Software Update function is the
easy method to upgrade the
operational software for the
GSW/SNMP.
Upgrade Line Card
The Update Line Card function is the easy method to upgrade any of the line
cards installed in the FRM220A CH20 chassis (except the 1000EAS/X).
Reset All Line Cards
The reset all line cards function will do a warm reboot of all line cards
installed and recognized in the 220A.
All Line Cards Set to Factory Default
The set all line cards to factory default function will return each installed card
to its original factory default settings.
Figure 3.6 The real-time status of installation Card, Power Module and Fan.
"Local Area"(Figure 3.6) will display a
graphic representation of all the cards
inserted in the chassis and the real-time
status of all LEDs (this display is also the
default 'Home' page of the web interface).
The graphic indicators at the bottom of the
display show the real-time status of the two
Power Modules, the two chassis fans and
temperature. An error in any of these will
result in the effected icon's LED blinking in
RED.
Local/Remote Area
a
ds
e
e
o
ll
n
Information
Information about the system is displayed here, including the
hardware version, the MAC address, firmware versions and
software version information
Configuration
System information includes the MIB-2 variables for contact,
name and location of the system.
IP Setup
The IP Setup provides the web based method to change the IP
address, subnet mask, default gateway and the VLAN ID.
Date and Time
The Date & Time Setup provides the web based method to
change the system time and configure SNTP time synchroniza-
tion.
Password Setup
Enter the old password, if there is one, and enter new password
twice.
Monitor
The Monitor screen will display system information for the type
and status of Power 1 and Power 2, the fans status and RPM, the
GSW CPU temperature and the GSW card board temperature (in
Centigrade).
Alarm Setup
The Alarm screen will display current alarm status. Inactive
means there are currently no alarms. Active means an alarm
condition exists.
Parameters
The GSW/SNMP has backup and restore functions that work at a
card level (backup individual card or all cards to PC, or restore
parameters from a backup file on PC to single card or all other
like cards).
The system settings include informational as well as configuration setting.
System
3-8
FRM220A-GSW/SNMP GUI
www.ctcu.com CTC UNION TECHNOLOGIES CO., LTD.
Graphical User Interface
3
GUI
(20 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais