CTC Union IPCAM-8309FW Manual do Utilizador descarregar pdf (Página 34)

4.4.4 FTP Client

Use this setup page to configure capturing and sending of images to an FTP server. By using

FTP client function, you can send a video file which has been shot and recorded triggered by

the external sensor input, alarm buffer or with the built-in motion detection function to FTP

server. FTP client setting menu is composed of three tabs, General, Alarm sending and

Periodical sending.

4.4.4.1 General

FTP client function：To activate the FTP client function, select On. The FTP client setting

page appears. When you do not wish to use the FTP client function, select Off.

Note：The frame rate and operability on the main viewer may decrease while a file is being

transmitted by the FTP client function.

FTP server name：Type the FTP server name to upload still images up to 64 characters, or

the IP address of the FTP server.

User name：Type the user name for the FTP server.

Password：Type the password for the FTP server.

Retype password：To confirm the password, type the same characters as you typed in the

Password box.

Passive mode：Set whether you use the passive or active mode of FTP when connecting to

FTP server. Select On to connect to FTP server using the passive mode.

Attached file type：Set attached file type to JPEG or MPEG-4.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 52 53

Sem comentários

CTC Union IPCAM-8309FW Manual do Utilizador Página 34